LAB Gruppen Lucia 60/2M Amplifier

  • Compact 2 x 30 W Matrix Amplifier for Installation Applications
    • Compact matrix amplifier which offers full output power across a range of loads with 2 x 30 W into 8, 4 or 2 Ohms
    • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning
    • 4 x 4 matrix allows mixing and routing all inputs to amplifier output channels and 2 balanced line level outputs
    • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows* and Mac*
    • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
    • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level
    • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter
    • Optimized presets available for a wide range of loudspeaker models for fast configuration
    • Enhanced Bass Profile for extended LF response with small loudspeakers
    • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load
    • Efficient Class-D amplifier with low distortion and minimal heat dissipation
    • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting
    • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems
    • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection
    • Universal power supply supports 100
    • - 240 V AC at 50 or 60 Hz
    • Intelligent fan control for silent operation at idle and at lower output levels
    • Front panel power and fault indication as well as per-channel signal LED and attenuation knob
    • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals
    • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources
    • Rackmount kit, pole-mount kit and wall panel kits available as accessories
    • 10-Year Warranty Program*
    • Designed and engineered in Sweden
  • General

    Number of amplifier channels


    Max total output all channels driven

    60 W

    Max output voltage per channel

    21.9 V peak

    Max output current per channel

    3.9 Arms

    Max output power (all channels driven)

    2 ohms

    30 W

    4 ohms

    30 W

    8 ohms

    30 W

    16 ohms

    15 W


    THD 20 Hz - 20 kHz at 1 W into 8 ohms


    THD at 1 kHz and 1 dB below clipping


    Signal to Noise Ratio

    >95 dBA

    Channel separation (Crosstalk) at 1 kHz

    >60 dBA

    Frequency Response

    5 Hz - 22 kHz

    Input impedance

    10 kOhm

    Common Mode Rejection (CMR)

    40 dB

    Gain, Sensitivity and Limiters

    VPL for 16 ohm mode

    21.9 V peak

    VPL for 8 ohm mode

    21.9 V peak

    VPL for 4 ohm mode

    15.5 Vpeak

    VPL for 2 ohm mode

    11 Vpeak

    Sensitivity, balanced input

    4 dBu / 1.23 Vrms

    Sensitivity, RCA input

    -2 dBu / 0.62 Vrms

    Input headroom for clip, balanced 1

    12 dBu / 3.09 Vrms

    Input headroom for clip, RCA 1

    6 dBu / 1.55 Vrms

    Connectors and Buttons

    Output connectors (per ch.)

    2 - pin detachable screw terminals

    Line-level output connectors (ch. 3 & 4)

    3 - pin detachable screw terminals, electronically balanced

    GPI (power control input) 2

    2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default for gain.

    Input connectors (per ch.)

    3 - pin detachable screw terminals, electronically balanced


    Can be controlled and monitored by third parties via RS232 using both the GPI pins


    For firmware update and configuration with the Application Browser software

    Level adjustment (per channel)

    Front panel potentiometer, detented from -inf to 0 dB

    Processing Features

    Input processing block 3

    4 EQ sections per input

    Mix matrix routing block 3

    4 in - 4 out mix-matrix controllable from GPI

    Output processing block 3

    4 EQ sections per output (presets available for many loudspeakers) User adjustable output look ahead limiter ADLC (Adaptive ISO 226 compensation)

    Two line level outputs 4

    Each capable of driving 10 LUCIA devices in parallel

    Latency from any input to any output

    User adjustable from 9.15 to 137 ms


    Nominal voltage

    100 – 240 VAC

    Operating voltage

    85 – 265 VAC

    Mains connector

    IEC inlet


    One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C

    Auto mode

    The power state is controlled automatically by the audio signal



    W: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”)



    1.9 kg (4.2 lbs)



    Black aluminum front and black steel chassis



    CE, CSA, CCC, PSE, FCC, Energy Star

We look forward to assisting you

Please Call Us At 888-419-3113

For our most current pricing

google-site-verification: google88eed4e5ecd929a8.html