LAB Gruppen E 10:4 Amplifier

$1,500.00

DESCRIPTION
SPECIFICATIONS
REVIEWS

1,000 Watt Amplifier with 4 Flexible Output Channels for Installation Applications
- 1,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 250 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fans with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- 10-Year Warranty Program*
- Designed and engineered in Sweden
Read More...

General

Number of amplifier channels	4
Total output all channels driven	1000 W
Peak output voltage per channel	100 V / 70 Vrms
Max. output current	14 Arms

Max output power (all channels driven)

2 ohms	N.R.
4 ohms	250 W
8 ohms	250 W
16 ohms	250 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 125 W)
70 V	250 W
100 V	Can deliver 250 W to a 100 V load tapped at 500 W

Performance

THD 20 Hz - 20 kHz at 1 W	<0.1%
THD at 1 kHz and 1 dB below clipping	<0.05%
Signal to Noise Ratio	>112 dBA
Channel separation (Crosstalk) at 1 kHz	> 70 dB
Frequency Response	2 Hz - 40 kHz
Input impedance	20 kOhm
Common Mode Rejection (CMR)	50 dB
Output impedance	25 mOhm

Gain, Sensitivity and Limiters

Limit and gain switch defining limit and gain (per channel)	2 pos: Lo-Z and 70 V
VPL for 70 V mode	100 V
VPL for Lo-Z mode	63.2 V
Sensitivity for stated power into 8 Ohm in Lo-Z mode	4 dBu
Sensitivity for 70.7 V out in 70 V mode	4 dBu
Sensitivity for stated power into 4 Ohm in Lo-Z mode	1 dBu
Sensitivity for stated power into 16 Ohm in 70 V mode	3 dBu
Gain in 70 V mode	35.2 dB
Gain in Lo-Z mode	31.2 dB
Level adjustment (per channel)	Rear panel potentiometer, from -inf to 0 dB

Connectors and Switches

Input connectors (per ch.)	3 - pin detachable screw terminals, electronically balanced
Output connectors (per ch.)	2 - pin detachable screw terminals
High pass filter	Fixed at 50 Hz, switchable per channel
Power control	Can be used to go between standby and ON
GPI (power control input)	Contact closure type, 2-pin detachable screw terminal, controls the power state
GPO (power state output)	Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state
Cooling	Two fans, front-rear airflow, temperature controlled speed