Acurus Scorpion Integrated Amplifier

  • The Acurus Scorpion is a compact, yet powerful multi-room audio solution for medium-to-large residential and light commercial installations. The Scorpion delivers clean, clear audio power to 8 stereo loudspeaker zones using 16 channels of high-efficiency, low-distortion audio amplification. Two additional stereo zones can be driven from internal pre-amplifiers for a total of 10 stereo zones. Each zone may be independently driven or driven from one of two global inputs. Amplifier outputs are bridgeable for up to 160W into 8Ω loads.

    The Scorpion sets a new standard for ease of installation through both its web-based setup and its simple, intuitive, full-color touch-sensitive control panel. Zone audio parameters may be independently adjusted for varying speaker sensitivities, room sizes, stereo/mono configuration and loudness requirements. Volume may be controlled for each zone or as part of a volume group. Stereo zones may be assigned to individual trigger inputs or added to trigger input groups.

  • Electrical

    • Power Output:
      • 40W (8Ω),80W (4Ω), All Channels Driven
      • 50W (8Ω), (CEA-2006, All Channels Driven)
      • 160W (Bridged, 8Ω)
    • THD+N (amplifier): < 0.05% (40W,8Ω),< 0.08% (80W, 4Ω), 1kHz, All Channels Driven
    • Frequency Response: 20 – 20kHz ± 0.15dB
    • SNR: 118dB (A-wt.)
    • Input Impedance: 10kΩ
    • THD+N (pre-amplifier): <0.007% (20–20kHz)
    • Max Output (pre-amplifier)3.3Vrms
    • Power consumption 20W(idle), 900W (max), <0.5W (standby)


    • Front panel display: 2.4” touch-sensitive LCD
    • RS-232: 1 x DB-9,Full 2-way control
    • Ethernet: 1 x Ethernet, Web interface & 2-way IP control via UDP
    • 12V trigger in: 8 x 3.5mm (zone 1 through 8)
    • 12V trigger out: 2 x 3.5mm (zones 9, 10)

    Audio Inputs/Outputs:

    • Stereo bus audio inputs: 2 x Gold-plated (RCA) L/R pairs
    • Stereo zone audio inputs: 8 x Gold-plated (RCA) L/R pairs
    • Stereo zone pre-amp outputs: 2 x Gold-plated (RCA) L/R pairs
    • Loudspeaker out: 8 x block terminal (up to 12 AWG wire supported)


    • Product dimensions: 3.5" (8.9cm) x 19” (48.3cm) x 15.75” (40.0cm) (main enclosure width is 17” with integrated 19” wide front panel)
    • Product weight: 17 lbs. (7.71kg)
    • Finish: Black satin anodized, laser-etched logo, white rear panel
    • Carton dimensions: 10” (25.4cm) x 22” (55.9cm) x 18” (45.7cm)

We look forward to assisting you

Please Call Us At 888-419-3113

For our most current pricing

google-site-verification: google88eed4e5ecd929a8.html